| |
Service |
Price |
| |
|
|
| |
| Cylinder, full visual inspection |
More(+) |
|
$18.00 |
| |
Required annually. Turnaround time is normally next day. Eddy current exam is required for aluminum 6351 alloy cylinders, and suggested for all aluminum cylinders.
> Inspect to standards of Professional Scuba Inspectors, Inc. (PSI)
> If appropriate, use an eddy current device to further evaluate the threads.
> Clean the neck/valve threads, lubricate and install new neck/valve O-ring.
> Install valve on cylinder, and test for leaks.
> Supply full documentation of inspection. |
|
|
| |
|
|
| |
| Cylinder, hydrostatic test |
More(+) |
|
$25.00 |
| |
Required every five years. Turnaround time is two-three days.
> Test the cylinder at a TC-authorized hydrostatic test facility.
> Rinse cylinder interior and thoroughly dry. |
|
|
| |
|
|
| |
| Cylinder, tumble and clean interior |
More(+) |
|
$16.00 |
| |
Required when significant interior corrosion is present. Turnaround time is next day.
> Dry tumble cylinder with abrasive appropriate for cylinder composition.
> Blow out cylinder with high pressure air to remove all dust. |
|
|
| |
|
|
| |
| Paint ball Cylinder, hydrostatic test |
More(+) |
|
$30.00 |
| |
Required every five years. Turnaround time is two-three days.
> Test the cylinder at a TC-authorized hydrostatic test facility.
> Rinse cylinder interior and thoroughly dry. |
|
|
| |
|
|
| |
| Cylinder and Valve, prep for oxygen service |
More(+) |
|
$35.00 |
| |
Recommended annually. Turnaround time is next day.
> Wash cylinder interior with environmentally safe detergents to remove hydrocarbon contamination.
> Rinse cylinder interior and thoroughly dry.
> Completely disassemble valve, hydrostatically clean, and carefully inspect all parts for damage/corrosion/wear.
> Replace any parts as appropriate, and always replace all O-rings using oxygen-compatible products. |
|
|
| |
|
|
| |
| Cylinder Whipping |
More(+) |
|
$10.00 |
| |
Required anytime excess Aluminum Oxide is detected in Aluminum tanks, or slight corrosion is detected in steel tanks.
A Whipping brush is used to remove contaminants from cylinder wall. |
|
|
| |
|
|
| |
| Valve, periodic maintenance |
More(+) |
|
$15.00 |
| |
Recommended at same time as cylinder hydrostatic test. Turnaround time is next day.
> Completely disassemble, ultrasonically clean, and carefully inspect all parts for damage/corrosion/wear.
> Replace any parts as appropriate, and always replace the burst disk and all O-rings.
> Install valve on cylinder, and test for leaks. |
|
|
| |
|
|
| |
| Manifold Oxygen cleaning |
More(+) |
|
$22.50 |
| |
Required annually. Turnaround time is normally next day.
> Disassemble manifold.
> Hydrostatically clean all parts, replace o-rings.
>Assemble manifold and test for leaks. |
|
|
| |
|
|
| |
| Regulator Service - Silver Package |
More(+) |
|
$90.00 |
| |
Recommended annually. Turnaround time is two days, and we offer priority rush service.
> Maintain 1st stage and two 2nd stages.
> Completely disassemble, hydrostatically clean, and carefully inspect all parts for damage/corrosion/wear.
> Replace all parts as recommended by the manufacturer and is in included in their service kits.
> Assemble, test and tune to factory specifications. |
|
|
| |
|
|
| |
| Regulator Service - Gold Package |
More(+) |
|
$110.00 |
| |
Recommended Every 3 years. Turnaround time is two days, and we offer priority rush service.
> Maintain 1st stage and two 2nd stages.
> Completely disassemble, hydrostatically clean, and carefully inspect all parts for damage/corrosion/wear.
> Replace all parts as recommended by the manufacturer and is in included in their service kits.
> Replace all o-rings on hoses, lubricate as necessary.
> Replace o-rings on SPG swivel, clean and re-assemble.
> Assemble, test and tune to factory specifications. |
|
|
| |
|
|
| |
| Hourly labor rate |
More(+) |
|
$75.00 |
| |
|
|
| |
|
|
.jpg)
.jpg)
